Peerless XT25SC90

Peerless XT25SC90

$22.00

Peerless XT25SC90-04 tweeter (Vifa)

• (Part number changed from XT25SC50)
• Dual Concentric Textile Ring Dome
• Neodymium magnet
• Phase Plug
• Ring formed absorption chamber
• Heat sink
• Gasket
• 4 Ohm
• Fs 837
• 91.7 dB
• Outside diameter 65mm
• Cut out 46.2mm (47mm max!!!)
• Depth 21mm
• Small terminal is positive and large is negative

 

$22.00

Peerless XT25SC90-04 tweeter (Vifa)

• (Part number changed from XT25SC50)
• Dual Concentric Textile Ring Dome
• Neodymium magnet
• Phase Plug
• Ring formed absorption chamber
• Heat sink
• Gasket
• 4 Ohm
• Fs 837
• 91.7 dB
• Outside diameter 65mm
• Cut out 46.2mm (47mm max!!!)
• Depth 21mm
• Small terminal is positive and large is negative

 

ScanSpeak Revelator R2904/700000

ScanSpeak Revelator R2904/700000

$372.00

ScanSpeak Revelator R2904/700000 Tweeter, Silver Face, Silver Plug

• 1" Ring Dome Diaphragm
• Patented Symmetrical Drive (SD-2) motor
• Non Resonant Alu Rear Chamber
• Patented Phase Plug Design
• Large Ring Neo Magnet for High Output
• Silver Anodized Mashined Alu Face Plate

The Scan-speak R2904-700000 tweeter is the new flagship tweeter in the Scan-speak line. This tweeter incorporates many innovative design concepts.
The first notable difference is the use of a phase plug. The dome is attached to the phase plug, so the radiating area is now concentrated around the voice coil. This offers more control and reduces distortion and loss that occur at the center of the dome on dome tweeters. The phase plug also acts as a wave guide, reducing high frequency cancellations. A specially designed venting system uses a needle to cut down on turbulence in the air cavity. Better dynamics are achieved by not using ferrofluid, voice coil cooling is performed by the venting system and conduction through copper rings. The new SD-2 neodymium magnet system improves transient response.

$372.00

ScanSpeak Revelator R2904/700000 Tweeter, Silver Face, Silver Plug

• 1" Ring Dome Diaphragm
• Patented Symmetrical Drive (SD-2) motor
• Non Resonant Alu Rear Chamber
• Patented Phase Plug Design
• Large Ring Neo Magnet for High Output
• Silver Anodized Mashined Alu Face Plate

The Scan-speak R2904-700000 tweeter is the new flagship tweeter in the Scan-speak line. This tweeter incorporates many innovative design concepts.
The first notable difference is the use of a phase plug. The dome is attached to the phase plug, so the radiating area is now concentrated around the voice coil. This offers more control and reduces distortion and loss that occur at the center of the dome on dome tweeters. The phase plug also acts as a wave guide, reducing high frequency cancellations. A specially designed venting system uses a needle to cut down on turbulence in the air cavity. Better dynamics are achieved by not using ferrofluid, voice coil cooling is performed by the venting system and conduction through copper rings. The new SD-2 neodymium magnet system improves transient response.

ScanSpeak Illuminator R3004/6020-00 1"

ScanSpeak Illuminator R3004/6020-00 1"

$158.00

ScanSpeak Illuminator R3004/6020-00 1" Tweeter Small Ring Radiator

• 1" Soft Ring Dome
• Ring Neodymium Magnet
• Patented Symmetrical Drive (SD-2) motor
• Patented Phase Plug Design
• Aluminum Face Plate and Housing
• Sound Transparent Protective Grill
• Shallow Non Resonant Alu Rear Chamber
• 61.9mm (2.44") diameter flange with 21.5mm (0.85") depth (see drawing below)
• Excellent choice for both home hi-fi and autosound applications

The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.
The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
R3004-602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.
The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

 

$158.00

ScanSpeak Illuminator R3004/6020-00 1" Tweeter Small Ring Radiator

• 1" Soft Ring Dome
• Ring Neodymium Magnet
• Patented Symmetrical Drive (SD-2) motor
• Patented Phase Plug Design
• Aluminum Face Plate and Housing
• Sound Transparent Protective Grill
• Shallow Non Resonant Alu Rear Chamber
• 61.9mm (2.44") diameter flange with 21.5mm (0.85") depth (see drawing below)
• Excellent choice for both home hi-fi and autosound applications

The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.
The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
R3004-602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.
The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

 

ScanSpeak Illuminator R3004/6620

ScanSpeak Illuminator R3004/6620

$273.00

ScanSpeak Illuminator R3004/6620-00 1" Tweeter - Black Face Plate

• 1" Ring Dome Diaphragm
• Patented Symmetrical Drive (SD-2) motor
• Diffraction Damping Rubber Front
• Patented Phase Plug Design
• AirCirc Motor Design with 6 Neo magnets
• Die Cast Rubber Painted Alu Face Plate

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion. The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability. R3004 builds on the experience of the one-inch R29 ring radiator, resulting in low resonance frequency, superb vocal rendition and excellent imaging at all listening locations.
Scan-speak’s unique AirCirc Magnet System -- named for the way it optimizes air flow within the chamber – rearranges the traditional magnet structure from a single magnet to an open magnetic circuit comprised of six separate neodymium slugs. This, in combination with the chamber, results in the elimination of the reflections and resonances that compromise the performance of traditional motors.

 

$273.00

ScanSpeak Illuminator R3004/6620-00 1" Tweeter - Black Face Plate

• 1" Ring Dome Diaphragm
• Patented Symmetrical Drive (SD-2) motor
• Diffraction Damping Rubber Front
• Patented Phase Plug Design
• AirCirc Motor Design with 6 Neo magnets
• Die Cast Rubber Painted Alu Face Plate

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion. The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability. R3004 builds on the experience of the one-inch R29 ring radiator, resulting in low resonance frequency, superb vocal rendition and excellent imaging at all listening locations.
Scan-speak’s unique AirCirc Magnet System -- named for the way it optimizes air flow within the chamber – rearranges the traditional magnet structure from a single magnet to an open magnetic circuit comprised of six separate neodymium slugs. This, in combination with the chamber, results in the elimination of the reflections and resonances that compromise the performance of traditional motors.

 

Vifa OT19NC00 2/3" Ring Radiator

Vifa OT19NC00 2/3" Ring Radiator

$23.00

Vifa OT19NC00 2/3" Ring Radiator Tweeter - 4 ohm


This member of the OT Tweeter family utilizes two technologies to deliver exceptional sound: the ring radiator patent and the central waveguide patent.


This model features a 4 ohm 10mm voice coil, mounted in a neodymium magnet motor, and a rear chamber to create an extended low frequency response.


This compact tweeter comes without a faceplate, which makes it ready for installation into compact systems.










 

$23.00

Vifa OT19NC00 2/3" Ring Radiator Tweeter - 4 ohm


This member of the OT Tweeter family utilizes two technologies to deliver exceptional sound: the ring radiator patent and the central waveguide patent.


This model features a 4 ohm 10mm voice coil, mounted in a neodymium magnet motor, and a rear chamber to create an extended low frequency response.


This compact tweeter comes without a faceplate, which makes it ready for installation into compact systems.










 

Vifa XT25BG60 Double Magnet

Vifa XT25BG60 Double Magnet

$32.00

 

Vifa XT25BG60-04 Double Magnet Ring Dome Tweeter
The goal for this tweeter series was to create a transducer that has a frequency response that is flat to above 20K, and where the distortion is far lower than normal and more friendly to the ear. The tweeters represent a unique approach to tweeter design that has resulted in unrivaled performance, as well as in several patents (dual concentric diaphragm, wave-guide center plug).
Driver Highlights: Dual concentric diaphragm (Patent), Wave-guide center plug (Patent), copper-clad aluwire

$32.00

 

Vifa XT25BG60-04 Double Magnet Ring Dome Tweeter
The goal for this tweeter series was to create a transducer that has a frequency response that is flat to above 20K, and where the distortion is far lower than normal and more friendly to the ear. The tweeters represent a unique approach to tweeter design that has resulted in unrivaled performance, as well as in several patents (dual concentric diaphragm, wave-guide center plug).
Driver Highlights: Dual concentric diaphragm (Patent), Wave-guide center plug (Patent), copper-clad aluwire

ScanSpeak R2604/8320 1"

ScanSpeak R2604/8320 1"

$55.00

ScanSpeak Discovery R2604/8320 1" Tweeter Ring Radiator

• Dual Ring Radiator diaphragm (Patent)
• Wave-guide center plug (Patent)
• Extended Frequency To Above 40KHz
• Very Low Resonance Frequency - 550Hz
• Low Distortion
• Coated Fabric Diaphragm
• Rear Chamber
• Copper-clad aluwire

The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!

ScanSpeak Discovery R2604/8320 1" Tweeter Ring Radiator

• Dual Ring Radiator diaphragm (Patent)
• Wave-guide center plug (Patent)
• Extended Frequency To Above 40KHz
• Very Low Resonance Frequency - 550Hz
• Low Distortion
• Coated Fabric Diaphragm
• Rear Chamber
• Copper-clad aluwire

The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!

This tweeter is the Scan-Speak Danish made version of the VIfa XT25TG30-04 tweeter.

$55.00

ScanSpeak Discovery R2604/8320 1" Tweeter Ring Radiator

• Dual Ring Radiator diaphragm (Patent)
• Wave-guide center plug (Patent)
• Extended Frequency To Above 40KHz
• Very Low Resonance Frequency - 550Hz
• Low Distortion
• Coated Fabric Diaphragm
• Rear Chamber
• Copper-clad aluwire

The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!

ScanSpeak Discovery R2604/8320 1" Tweeter Ring Radiator

• Dual Ring Radiator diaphragm (Patent)
• Wave-guide center plug (Patent)
• Extended Frequency To Above 40KHz
• Very Low Resonance Frequency - 550Hz
• Low Distortion
• Coated Fabric Diaphragm
• Rear Chamber
• Copper-clad aluwire

The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!

This tweeter is the Scan-Speak Danish made version of the VIfa XT25TG30-04 tweeter.

Vifa XT25TG30 1"

Vifa XT25TG30 1"

$33.00

Vifa XT25TG30-04 1" Ring Radiator Tweeter

• 25mm Dual concentric diaphragm
• Non-reflective dual chamber
• Controlled directivity
• Wave-guide center plug
• copper-clad aluwire VC and braided leads
• Flange 104mm
• Cutout 73.5mm
• Diameter 41mm

 

$33.00

Vifa XT25TG30-04 1" Ring Radiator Tweeter

• 25mm Dual concentric diaphragm
• Non-reflective dual chamber
• Controlled directivity
• Wave-guide center plug
• copper-clad aluwire VC and braided leads
• Flange 104mm
• Cutout 73.5mm
• Diameter 41mm

 

Scanspeak 15WU/8741T 5"

Scanspeak 15WU/8741T 5"

$279.00

Scan-Speak Illuminator 15WU/8741T-00 5" Woofer

• Paper cone
• Cast frame
• Neodymium motor
• Underhung voice coil
• long excursion

The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression.
Madisound recommends:

• Sealed box of 0.15 cubic feet for an F3 of 115Hz
• Vented box of 0.2 cubic feet with 1.5" diameter vent by 6" long for F3 of 60Hz
• Extended bass shelf of 0.3 cubic feet with 1.5" diameter vent by 6" long for F3 of 56Hz.

$279.00

Scan-Speak Illuminator 15WU/8741T-00 5" Woofer

• Paper cone
• Cast frame
• Neodymium motor
• Underhung voice coil
• long excursion

The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression.
Madisound recommends:

• Sealed box of 0.15 cubic feet for an F3 of 115Hz
• Vented box of 0.2 cubic feet with 1.5" diameter vent by 6" long for F3 of 60Hz
• Extended bass shelf of 0.3 cubic feet with 1.5" diameter vent by 6" long for F3 of 56Hz.